noobpad.blogg.se - Innovage outdoor radio users manual

INNOVAGE OUTDOOR RADIO USERS MANUAL MANUAL
INNOVAGE OUTDOOR RADIO USERS MANUAL UPGRADE
INNOVAGE OUTDOOR RADIO USERS MANUAL PASSWORD
INNOVAGE OUTDOOR RADIO USERS MANUAL ZIP
INNOVAGE OUTDOOR RADIO USERS MANUAL MAC

Connect the power cord to the adapter, and then plug the power cord into a power outlet.

Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow.

Connect the Ethernet cable from the device to the POE port of the POE adapter.

The device accepts powering only from Passive PoE injectors. The operation of this equipment in the residential environment could cause radio interference.Ĭonnect the Ethernet cable to the Ethernet port located under the door and guide through the leg as shown in the picture:Īdditional mounting brackets can be purchased separately: Warning! This equipment should be installed and operated with a minimum distance of 40 cm between the device and your body. This is to substantially reduce the risk of ESD and lightning damage. The device includes a grounding connection (marked ⏚) which you should connect to the grounding installation of the tower or building where the device will be used. This will create an additional upward or downward angle when the unit is tightened to a vertical pole. Optional: If required, before mounting the unit, you can insert the included 5-degree adjustment adapter into the top or bottom slot where the mounting ring is inserted.

Align and tighten the clamps to secure the device.

Guide provided steel clamps through the unit.

The clamping diameter with provided steel clamps is 35 – 70 mm.

INNOVAGE OUTDOOR RADIO USERS MANUAL ZIP

The device is designed to be mounted on the pole using zip ties or steel clamps as shown in the picture. Fix the legs in place with two self-thread screws (Use Phillips screwdriver PH2).Snap the assembled LHG unit to the grid in the appropriate locations.More information about using RouterOS and connecting to this device in our documentation: Assembly and Mounting In case you wish to boot the device from the network, for example, to use MikroTik Netinstall, hold the RESET button of the device when starting it, until the LED light turns off, then the device will start to look for Netinstall servers.

INNOVAGE OUTDOOR RADIO USERS MANUAL MAC

In case the IP connection is not available, Winbox can be used to connect to the MAC address of the device. You can do this in the QuickSet tab that is opened by default. The device is preconfigured as a wireless client and all you need to do is select the AP to connect to and set a device password.

INNOVAGE OUTDOOR RADIO USERS MANUAL PASSWORD

Set up your router password in the bottom field to the right and repeat it, it will be used to log in next time.Connect again and in the QuickSet menu choose your country, to apply country regulation settings.

INNOVAGE OUTDOOR RADIO USERS MANUAL UPGRADE

Upgrade the RouterOS software to the latest version.

Once connected configure the device, so it has an active Internet connection.

Default IP: 192.168.88.1, user name: admin and there is no password, or use Neighbors tab and connect through MAC address.

Plug the included power supply into the PoE injector to start up the device.

Plug the PoE injector into your network switch or computer.

Open the Ethernet door to connect an Ethernet cable to the Ethernet port, connect the other end of the Ethernet cable to the included PoE injector.

It can be used as a CPE or for point-to-point links (use RouterOS wireless mode "bridge" to work as a single-client AP for point-to-point scenarios). The LHG is an outdoor wireless router with a built-in directional antenna. All Mikrotik radio devices must be professionally installed.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. Read the installation instructions before connecting the system to the power source. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation for people and damage to the system.

Please read the wall mounting instructions carefully before beginning installation. This unit is intended to be mounted on a pole. The Installation of the equipment must comply with local and national electrical codes. Ultimate disposal of this product should be handled according to all national laws and regulations.

INNOVAGE OUTDOOR RADIO USERS MANUAL MANUAL

This manual covers LHG models: LHG 2 (RBLHG-2nD) LHG 5 (RBLHG-5nD) LHG HP5 (RBLHG-5HPnD) LHG 5 ac (RBLHGG-5acD) Safety Warningsīefore you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.